triumphs
[Top] [All Lists]

re:Removing 1/2" hex head in MC

To: prubrew@ix.netcom.com, Triumph list <triumphs@Autox.Team.Net>
Subject: re:Removing 1/2" hex head in MC
From: Brian Kemp <bk13@earthlink.net>
Date: Wed, 25 Mar 1998 23:17:47 -0800
>Date: Wed, 25 Mar 1998 02:59:08 -0800
>From: Chris Prugh <prubrew@ix.netcom.com>
>Subject: Removing 1/2" hex head in MC

>What is the preferred method and or tool for removing the
>1/2" hex head retainer in my dual resevoir master cylinder?

I used a large punch or chisel with a 1/2" hex shank and a box end
wrench.  I resorted to this after being unable to locate an allen wrench
at four local stores.  Took a good bit of torque to initially break the
bit free.

Brian Kemp
72 TR6


<Prev in Thread] Current Thread [Next in Thread>