I followed the recent thread on clutch bleeding -- knowing it to be on
the list of things that the '80 spitfire keeps me around for. While
replacing the clutch, pressure plate and release bearing, I rebuilt the
slave cylinder (which was leaking.)
After following various list members instructions for clutch bleeding, I
remain with a soft pedel. It's currently at a point where fluid drips
out when the bleed screw is opened, but pedel action doesn't seem to be
pushing anything -- there's just no resistance at all.
Everything worked fine prior to the dissambly, so...I'm assuming its not
a master cylinder problem? Appreciate all replys.
Best regards,
Ed Hamilton
|