TR3A - removal of front hub nut dust cover.

[Brian Kemp <bk13@earthlink.net>]

Angelo,

If it is the same as my TR6, the previous owner may have messed it up
anyway.  Grab your tray of odd bolts and try them till you find one that
fits.  I used #12 and 1/4" machine screws and on my hubs.  The bolt
pushes against the axle to gently ease out the cap.

My Autopress workshop manual (TR5/250/6) says to use a No. 10 AF
setscrew and in boldface warns "Do not pack the dust cap with grease."

Brian Kemp
72 TR6, Los Angeles