Re: TR3A valve cover gasket

[Chris Rodgers <The.4.Rodgers@xtra.co.nz>]

Don't soak it, it should be impervious anyway.

A tip:

Stick the gasket onto the rocker cover with some blu tak (I don't know
if you call it that over there,) or some double sided tape, clean the
head well, and bond tha gasket to the head rather than the rocker
cover.  

This creates a little dam that the oil won't get over.  You can use less
torque on your rocker cover nuts, too....


My 2 shiny pennies


Chris, triumphboy