Powder coat

[fred thomas <vafred@erols.com>]

One last comment on powder-coat, you cure it for 10 min. @ 385,(not 500) 
vent the oven door and after about 15 minutes or when the part is cool 
"INSTALL IT", not like paint and wait two days. There is a gravel shield 
between the front fenders on a Model "A" under normal driving conditions, 
about three years use is the limit before it's chipped-up, the shield on 
my "A" is P/C and twelve years old and not one chip, and never waxed, 
says a lot for this stuff.