> Ok. I took one listers tip and put a small socket over the end of the
> pushrod. This only added about 1/4" o the length, but I had to tighten
> down the slave cylinder with a wrench for the last 1/8" because it
> wouldn't seat against the bell housing by hand. This tells me there is
> no free play between clutch arm and cylinder. Even with this mod it
> still crunches going into reverse. To confirm matters, I drilled a
> hole
> in the housiong so I could actually see the rod. It starts to move
> after
> only 1/2" clutch pedal travel. So what the heck is wrong?
>
What kind of car is this? If it is like my TR6, you've probably got a
broken throwout fork, or throwout fork pin.
Stuart Steele
|