Fitting or removing a brake servo has no effect whatsoever on the
braking quality, however, of course it effects the pedal forces
necessary to achieve the same pressure. You need to remember to blank
off the existing vacuum pipe.
Gernot
> ----------
> From: James[SMTP:james.carpenter@ukaea.org.uk]
> Reply To: James
> Sent: Tuesday, March 03, 1998 4:06 PM
> To: triumph owners digest
> Subject: Brake Servos
>
>
> You know the type of brake servos fitted to GT6's, the
> straight through veriaty. If you retro fitted one of
> these to a Spitfire, and it faild. Would the efect of
> it not working detrement the brake proformance to less
> than with out a brake servo.
>
> I wan't to fit one, but am reluctant too, because of
> the posible dangers if the servo is not in good condition.
>
> Of cource I would overhaull, but I would still like to
> know of anyones personal experiences. This is quite
> low down on the list of things to do.
>
> Thanks in advance
>
>
> James
> --
> James Carpenter
> Yellow '79 spit wired by a trained marmot
>
|