That'll work. Most tool manufactures (at Snap-On, for sure) make 1/4"
square sockets or 1/4" and 3/8' drive tools.
Ken Gano
kengano@advant.com
TR3A TS57756 (in pieces)
----------
> From: len drake <drake@direct.ca>
> To: John Wiseman <queueman@bigdog.ads-oh.atg.titan.com>
> Cc: triumphs@autox.team.net
> Subject: Re: tool for adjusting TR6 drum brakes ?
> Date: Saturday, February 15, 1997 4:08 AM
>
> The adjuster on most british cars is 1/4 inch square.... The same size
as
> one of the sockets in your quarter inch drive set. What I did was to
take
> a cheap taiwanese socket and weld a handle on to it. Fits perfectly, and
have
> never rounded off an adjuster since.
>
> Cheers,
>
> Scott Drake
>
> >Howdy
> >
> >I am looking for the 'correct' tool to use with the read brake adjusters
> >on my TR6. Have been
> >using vise grips ( on No ) but don't want to ruin them. Is there a tool
> >I can get at a regular parts store (NAPA etc) for this adjustment ?
> >
> >Any help would be appreciated
> >
> >John Wiseman
> >76 TR6
> >
> >
|