> I just bought a spin off filter and oil cooler kit...thru BPC from MOSS
> for my 73/74 TR6 engine. I have fitted everything up apart from the oil
> thermostat, as I need to know which are the 'return' and 'from' unions
> on the filter housing.
>
> Looking directly at the side of the 6 motor, right into where the housing
>bolts,
> can anyone tell me in which direction the oil flows for the outer and inner
> holes.....i.e., does that hole on the left outer circle return to the motor,
> or feeed the filter?
>
> I hope that question is clear!
>
> Marcus
Marcus, the diagram in my shop manual shows the oil flowing
out of the block through the outer passage and back into it
through the one towards the center. This makes sense as the
outer part of the filter presents more surface area than the
inner part. I hope to order one of these for my GT6 in the
near future since I have already purchased at least one of
nearly every other item in the <vendor deleted> catalog.
Hope this is what you were after.
Dave
|