You can buy reflective heater ducting tape at most hardware stores- shinny
aluminum with sticky glue on the back side.
You guys are lucky. At least you have reflectors you can polish or stick
something to. Cobras don't have tail light reflectors! And yes, their tail
lights are next to impossible to see in daylight. Nearly got rear ended
more than once!
I installed dual filament Halogen bulbs purchased from Dave Bean Engineering
back in the '90s. Helped a lot.
Roland
----- Original Message ----- >
Date: Thu, 9 Feb 2012 16:17:57 -0500
> From: " Ron Fraser" <rfraser@bluefrog.com>
> To: <Landcmitch@aol.com>, <larryall@pacbell.net>,
> <tigers@autox.team.net>
>
> That is an idea. I would test it without glue first.
>
> I was thinking about doing a few experiments on this subject when I get
> the
> time.
>
> Maybe a rolled aluminum flashing insert might work either polished and
> cleared or gloss white paint, maybe polished stainless.
>
> The bulb holder ID is 1.8", that should have a circumference about 5.5"
> length for an insert.
>
> Food for thought.
>
> Ron Fraser
>
>
>
> -----Original Message-----
> From: Landcmitch@aol.com [mailto:Landcmitch@aol.com]
> Sent: Thursday, February 09, 2012 2:48 PM
> To: rfraser@bluefrog.com; larryall@pacbell.net; tigers@autox.team.net
> Subject: Re: [Tigers] Tail light reflectors
>
>
>
> You might try a little glue and the shiny side of aluminum foil.
>
> Charlie
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|