tigers
[Top] [All Lists]

Re: [Tigers] Tail light reflectors

To: rfraser@bluefrog.com, larryall@pacbell.net, tigers@autox.team.net
Subject: Re: [Tigers] Tail light reflectors
From: Landcmitch@aol.com
Date: Thu, 9 Feb 2012 14:47:32 -0500 (EST)
You might try a little glue and the shiny side of aluminum foil.
 
Charlie
 
 
In a message dated 2/7/2012 2:07:23 P.M. Pacific Standard Time,  
rfraser@bluefrog.com writes:

Larry
I just saw an article in Auto Restorer on tail  lights.  They used
Semi chrome polish on the reflector and Halogen  tail light bulbs.  I 
believe
Tiger Tom has stated that you need to  chrome plate the reflectors to get
bright tail lights.

I took a look through some of my spares and I notice I have a  couple
different styles of bulb holders.   One has  what is  now a corroded 
aluminum
reflector, possibly chromed, captured under the  bulb holder at the bottom 
of
the steel cup.   The other style  just has the bulb holder at the bottom of
the steel cup, the steel cup  looks like it has a bit of a reflective 
surface
but not  chrome

If you have those aluminum reflectors, I'm not  sure you can do much
with them.  You might be able to find some chrome  reflectors out of a
flashlight that might work.   Remake the  reflector out of polished 
Stainless
steel.

If you just  have the steel cup, steel can be polished and clear
coated, chrome them,  powder coat chrome or try some of the new chrome spray
paint on the market  now.  I have no idea how good the powder coat or chrome
paint products  look.

Halogen bulbs would probably be OK.  You just  have to make sure the
Halogen bulb does not get too hot and melt the  plastic lens or burn the
chrome paint if used on the steel cup.

Ron  Fraser


-----Original Message-----
From:  tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On  Behalf Of larryall@pacbell.net
Sent: Thursday, February 02, 2012 3:20  PM
To: tigers@autox.team.net
Subject: [Tigers] Tail light  reflectors


Hello
The taillight reflectors are showing lots of  grime and corrosion.  They 
look
like they just sort of clip in to the  housing.  I called Sunbeam 
Specialties
for a possible replacement  reflector but he had nothing.  Does anyone know
of a source for these  reflectors and, if not, a way to clean them up enough
so that they reflect  again? thanks in  advance.
_______________________________________________

tigers@autox.team.net

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com




-----
No  virus found in this message.
Checked by AVG - www.avg.com
Version:  2012.0.1913 / Virus Database: 2112/4781 - Release Date:  02/02/12
_______________________________________________

tigers@autox.team.net

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  
http://autox.team.net/mailman/options/tigers/landcmitch@aol.com
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>