tigers
[Top] [All Lists]

Re: [Tigers] Tiger Sheet metal

To: <robin02@mindspring.com>, "'Baker,Kent'" <kentb@qualcomm.com>,
Subject: Re: [Tigers] Tiger Sheet metal
From: "Samouce's" <wsamouce@kc.rr.com>
Date: Thu, 27 Aug 2009 11:56:27 -0500
I called Bob recently to inquire about a steel LAT hood.  He told me is so
many words that I did not have enough money for him to make me one.

I recently replaced my front valance with a VB unit.  It was a good fit.

HTH's
Duke
B382002037

-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of robin02@mindspring.com
Sent: Thursday, August 27, 2009 11:43
To: Baker,Kent; tigers@autox.team.net
Subject: Re: [Tigers] Tiger Sheet metal

KEnt, I spoke to Bob Martel about five years ago when he was moving away
from the Sunbeam fabrication efforts. HE was selling some things he still
had already made but was not doing any more. It was Bob that told me that
Victoria British had a good supplier for body panels from ENgland and the
fit was good.   LArry Paulick later confirmed this and I bought ten body
panels for my car; front and back of each wheel well and the outer rocker
panels.  THe inner rocker panels were fabricated by my body, paint man.  THe
fit was good and my car turned out without any evidence of patch panels.  At
the time, neither Rick not Curt could fill the order. RObin Young

---Original Message-----
>From: "Baker, Kent" <kentb@qualcomm.com>
>Sent: Aug 26, 2009 1:14 PM
>To: "tigers@autox.team.net" <tigers@autox.team.net>
>Subject: [Tigers] Tiger Sheet metal
>
>I am finally getting to the complete restoration of my MK1a, and am looking
>for quality sheet metal replacement parts.  Although a Southern California
>car, it has rust on the frame exhaust pass through and a few pin holes on
the
>floorboards immediately above.  The shop doing the frame welding contacted
>Martell in Ontario, but he is out of the Tiger sheet metal business. I
noticed
>Classic Sunbeam Auto Parts has the exhaust frame patches listed on its
parts
>sheet, but have no experience (yet) working with them.  Suggestions for
>sources?  The car is in Reno, Nevada, although I live in San Diego.
>
>Kent Baker
You are subscribed as wsamouce@kc.rr.com

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>