tigers
[Top] [All Lists]

Re: [Tigers] Thunderbird 302s / 90 degree adapter

To: "Teepen, Jere" <jteepen@usatoday.com>, Buck Trippel
Subject: Re: [Tigers] Thunderbird 302s / 90 degree adapter
From: Dave Munroe <dave@munroe.ca>
Date: Mon, 29 Sep 2008 20:08:04 -0300
The "shortie" filter I used with my previously displayed headers was a Wix 
51335. Couldn't have filtered much..it is really short.

Dave



----- Original Message ----- 
From: "Teepen, Jere" <jteepen@usatoday.com>
To: "Buck Trippel" <BuckTrippel@Verizon.net>; <CoolVT@aol.com>; 
<achd73@yahoo.com>; <tigers@autox.team.net>
Sent: Monday, September 29, 2008 7:30 PM
Subject: Re: [Tigers] Thunderbird 302s / 90 degree adapter


>A filter commonly referenced for the Renault was the Fram PH3512, which is 
>now
> very difficult to find. NAPA has an equivalent NAPA branded 1056, which is 
> a
> bit smaller in diameter but also a bit longer than the PH3512, that works 
> and
> fits well.
>
> The CAT headers (I have been told...) were initially designed to work with 
> a
> remote filter set up but have evolved over the years to accommodate a 
> short
> block filter.
>
> -----Original Message-----
> From: tigers-bounces+jteepen=usatoday.com@autox.team.net
> [mailto:tigers-bounces+jteepen=usatoday.com@autox.team.net] On Behalf Of 
> Buck
> Trippel
> Sent: Monday, September 29, 2008 7:28 AM
> To: CoolVT@aol.com; achd73@yahoo.com; tigers@autox.team.net
> Subject: Re: [Tigers] Thunderbird 302s / 90 degree adapter
>
> Tony,
>
> Most everyone with CAT headers has read the CAT tech tip about the Renault 
> oil
> filter that doesn't need a 90 degree adapter. The current headers 
> definitely
> clear it.
>
> I do still run the 90 degree adapter with the old JC Whitney headers that
> Thunderbird Products made decades ago.
>
> Buck Trippel
>
>
> ----- Original Message -----
> From: <CoolVT@aol.com>
> To: <achd73@yahoo.com>; <tigers@autox.team.net>
> Sent: Sunday, September 28, 2008 6:44 PM
> Subject: Re: [Tigers] Thunderbird 302s / 90 degree adapter
>
>
>> Tony,
>> I can tell you that the 90 degree adapter won't fit with the   2008
>> version
>> of CAT headers.
>> Mark
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as dave@munroe.ca
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>