Hey Sandy;
Great looking project engine. I was interested in your build-specs - you
referenced a Crower Composite distributor Gear.....
I have just ordered one of those small cap MSD distributors for my Tiger, and
its specs indicate it comes with an iron drive gear.
I am running a Comp Cams 270 deg cam with flat tappet hydraulic roller lifters,
and had to put a special gear on the end of my
stock distributor. Do you know if I will need to change this iron gear that
comes with the MSD, and if so, is it likely that the gear
I put on the stock dizzy wil fit?
Thanks,
Dave
----- Original Message -----
From: "Sandy Ganz" <sganz@pacbell.net>
To: <achd73@yahoo.com>; <tigers@autox.team.net>; <CoolVT@aol.com>
Sent: Monday, September 29, 2008 12:37 AM
Subject: Re: [Tigers] Thunderbird 302s / 90 degree adapter
> It was pretty easy making a repacement for the external spin on filter with
> the Canton filter and a new adapter (old one might still work). The only down
> side is that you can't just get a filter at the autoparts store. Good to know
> that hoses last that long ;-)
>
> http://www.gtsparkplugs.com/TigerEngine.html
> Sandy
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|