Glen: I did the front end of my MGB exactly the way you described. Don't know
if I was supposed to do it that way, but I did. I was taking it all apart to
change the crossmember.
Glen Byrns wrote:
> Hey folks, help!
>
> I've offered to help a local MGB owner (father of daughter's friend) replace
> the inner A arm pivot bushings this weekend and I've never done an MGB. The
> picture at the Mo$$ site shows a 3-piece arm more like a Morris than a
> spridget.
> My plan is to jack it up, pull off the top shock link and brake caliper, then
> lower away until tension if off the spring. Then the usual "refitment is the
> reverse of removal" routine.
>
> Anyone out there with actual experience enough to pass on a tip or two?
>
> Thanks,
> Glen Byrns
|