Alex
A throw out bearing from a 1275 will not fit a 1098 fork, the male portion
of the bearing is slightly larger and will not into the machine grooves of
the 1098 fork.
The 1275 throw out bearing is relatively; flat, where as the 1098 throw out
bearing sits higher, when placed side by side.
The cast number on the 1275 bearing is 44733
the cast on the 1098 bearing is 0293.
To fit the 1275 clutch on your 1098 trans you will have to go with the 1275
pressure plate, clutch disc, throw out bearing, and 1275 clutch fork.
The only thing I'm not sure of is, whether you have to change the slave
cylinders, maybe one of the other listers may know.
Greg Higgins
---- Original Message -----
From "Alex Volk" <talla at TELUSPLANET.NET>
To: "Charles Christ" <cfchrist@earthlink.net>; <spridgets@autox.team.net>
Sent: Wednesday, June 18, 2003 2:47 PM
Subject: Re: release bearing
> How do I tell a 1098 ribcase from a 1275 then?
> My manual seems pretty useless here.
> How are the ratios different?
> Thanks
> Alex
>
> > 1098 had a rib case but difrent ratios from 1275 rib case. throw out
> > bearings fit any fork! interchangeable ! and any fork smooth case or
rib
> > case fit in the front cover of either style gear box! very very
> confusing!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|