Bill wrote:
>
> Hello spridgets,
>
> ok.. i changed back to the stock coil, car runs great,
> but the tach reads WAY high.. it actually seems to react
> with the speed of the motor, but shows 3200 at idle, and
> quickly pegs out...
Bill
There is an adjustable potentiometer (sp) inside the tach, if you remove
the tach from the housing then re-hook it up to the car including a good
ground, you can use a thin screw driver and turn the potentiometer ever
so S-l-o-w-l-y one way or another to reset it. You will need a
tach/dwell gauge to set it exactly or just set it by "feel" to what you
think is close.
Tech tip on this is to drill a hole in the housing inline with the slot
in the potentiometer so you can adjust it in the future with out
removing the guts from the housing.
--
Frank Clarici
Toms River, NJ
The bug in the rice bowl
http://www.exit109.com/~spritenut
|