My tach steadied down and began giving readings that resembled reality after
I removed one loop in the inductor wire on the back of the tach. If it now
takes two passes through the little nylon fitting on the back of the tach,
undo one end of the wire and remove one loop. Reconnect the undone end and
recheck the tach.
Regards,
Glen Byrns
'59 bugeye
----- Original Message -----
From "Bill" <pythias at pacifier.com>
To: <spridgets@autox.team.net>
Sent: Monday, August 07, 2000 6:06 AM
Subject: Tach Revisited
> Hello spridgets,
>
> ok.. i changed back to the stock coil, car runs great,
> but the tach reads WAY high.. it actually seems to react
> with the speed of the motor, but shows 3200 at idle, and
> quickly pegs out... the connections on the coil are
> tight, (those pesky little rivets are just fine)...
>
> any suggestions?... anything in the archives?
>
> --
> Best regards,
> Bill mailto:pythias@pacifier.com
>
>
> '66 Sprite HAN8L49403
>
>
|