Here is my variant:
* 1-5/16" socket 3/4" drive
* 3/4" drive breaker bar
* Spridget axle housing over breaker bar
* Beautiful danish girl in fancy outfit on end of axle housing
(buddy's girlfriend, was about to go out)
* Ulix sitting on engine block that is lying on its side on workbench
* Nut comes off like butter
* OK,OK, nut had been removed just 3 years ago with impact air wrench
* Wish I had taken a picture...
Ulix
On Tue, 22 Dec 1998, Daniel Thompson wrote:
> This is not the first time!
>
> . heated with a torch to red hot
> . 1-5/16" socket, heavy duty
> . 1/2 to 3/4" adapter
> . 5 foot tommy or "pry" bar
> . 2 people standing on the engine block
> . myself with one foot on the pry bar and one foot braced against the
> block
> . crankshaft pulley bolt did not budge
> . adapter sheared off like butter
>
> Back to Sears for another one, lifetime guarantee!
>
> This block will go to the local British car specialist for professional
> help!
>
> I love British cars!
>
> Daniel T.
>
Ulix __/__,__
.......................................................... (_o____o_)....
'67 Sprite
|