On Tue, 20 Jan 1998, Trevor Boicey wrote:
> Daryl May wrote:
> > You just hook the L&R speaker wires together (one set) and attach to one
> > pole of the single speaker, and the other L&R speaker wires together also
> > (hopefully these are a single color to identify that these go together) and
> > attach them to the other pole of the single speaker.
>
> I strongly recommend NOT doing this.
>
> Think of what happens when the left side is driving full forward
> and the right side is driving full reverse. Yup, a dead short.
> Considering
> this will happen hundreds of times a second, that's not so good.
I second that. The one thing I do know is that some stereos allow you to
use a common ground (connect the negative of both channels together), but
some specifically tell you not to do this.
I would either use a mono stereo (pun intended) or use two speakers.
Ulix __/__,__
.......................................................... (_o____o_)....
'67 Sprite
|