I found it easiest to do the final tighening on the shiny chrome cone-shaped
bit below the knob. There is a pair of flats at the top so you can get an
open-ended spanner on it (don't remember the size). Go carefully, so you
don't spoil the nice shiny finish!!
Richard
This email and any attached files are confidential and copyright protected. If
you are not the addressee, any dissemination of this communication is strictly
prohibited. Unless otherwise expressly agreed in writing, nothing stated in
this communication shall be legally binding.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|