Re: Valve spring binding test

[Nolan <foxtrapper@softhome.net>]

Roll the engine over until the lifter is on the peak of the cam lobe, 
opening the valve to its maximum.  Measure the clearance between the 
coils of the fully compressed spring.  Be very concerned if you cannot 
see light between the coils when fully compressed.

Larry Elswick wrote:

>What's the best way to check for valve springs
>binding? Thanks!

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive