thanks everyone, i did try persuading the output shafts to come out, i will
now try harder i was being overly cautious , i have a Haynes manual probably
not the best, i am going to replace the internalls with a 3.27 set from a
gt6.
thanks again john cave
Douglas Braun & Nadia Papakonstantinou wrote:
> Did you remove the output shafts?
>
> P.S: If you are taking apart the diff without a decent
> service manual, you are playing with fire...
>
> Doug Braun
> '72 Spit
>
> At 10:18 AM 9/18/00 -0400, you wrote:
>
> >i have a differential unit from a 74 spit on the bench , all the bolts
> >are loose, the allen bolts holding the output shafts are out , but i
> >cant seperate it, using screwdrivers i can just crack it open but there
> >is resistance, i have,nt undone the castellated nut ,i dont think thats
> >what, s causing the problem, but i could be wrong, could anyone point
> >out what i,m doing wrong .
> > much appreciated john cave
|