Re: Steering shaft bent?

[SJagGo@aol.com]

Hi Fred,
Steering bushes are easily removed.  Find a dowel or broomstick the 
approximate diameter of the steering cowl and insert it.  It takes a little 
bit of force, but the only thing holding those bushes in are 2 rubber tabs on 
each side which slide into holes in the cowl.  Insertion is the reverse. Line 
up the tabs with the holes and use the broomstick to put them in place.  If 
there was any play in the bushes at all you'll notice a world of difference.
Bill Brockschmidt