I always wind down two turns, on both 1 1/4" and 1 1/2".
Grant Buss
Graham Stretch wrote:
> Hi Ken
> Just checked all my manuals with SU's in and all it says is wind the jets up
> flush with the bridge then wind them down by an equal amount doesn't say how
> far, also wind the throttle screws clear of the stops then start and run at
> 2500 rpm until hot then tune up as normal.
> Sorry this is probably not much help!
>
> Graham.
>
> ----- Original Message -----
> From: Ken C <kenwc@pacbell.net>
> To: <spitfires@autox.team.net>
> Sent: Thursday, February 24, 2000 11:55 PM
> Subject: More Questions
>
> >
> > Spitlisters,
> >
> > About ready to fire up the motor. This is a '72, but with a '69 dual SU
> > setup. Are there any preliminary settings for the SU's ?
> >
> > TIA...Ken C
> >
|