I did something similar. I mounted some benchtop tools (scroll saw,
grinder, sheetmetal brake, etc.) to a piece of plywood and attached a cleat
across the underside. I can put this on my Workmate and clamp against the
cleat to hold everything in place and it's still portable.
Randy
On Mon, Feb 9, 2015 at 8:36 PM, Doug Braun <doug@dougbraun.com> wrote:
> I have one of those Craftsman folding workbenches with the two-piece
> clamping top surface.
> It is pretty stable. I also have several benchtop tools, like a small
> router table, a small band saw, and a buffer.
> I mounted each of these tools on a a 14" x 24" piece of plywood with an
> additional 2" wide strip running across
> the underside. To use a tool, I put it on top of the workbench with the 2"
> strip between the two pieces of
> workbench table, so it can be clamped in place. The tools that are not
> being used live on some shelving brackets
> on my garage wall.
>
> This system has worked well for me.
>
> Doug
>
> On Mon, Feb 9, 2015 at 7:50 PM, Brad Kahler <bkahler1@gmail.com> wrote:
>
> > I've got several bench grinders that I would like to mount on some sort
> of
> > movable pedestals. I don't want to anchor them to the floor so whatever
> I
> > end up using needs to be stable but portable.
> >
> > I've got several of the Harbor Freight 3 footed pedestals that would only
> > work if anchored to the floor and worse they are two short to use.
> >
> > Any suggestions on something that can be purchased, fabricated or what
> not?
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/rande@pobox.com
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|