I have one of those Craftsman folding workbenches with the two-piece
clamping top surface.
It is pretty stable. I also have several benchtop tools, like a small
router table, a small band saw, and a buffer.
I mounted each of these tools on a a 14" x 24" piece of plywood with an
additional 2" wide strip running across
the underside. To use a tool, I put it on top of the workbench with the 2"
strip between the two pieces of
workbench table, so it can be clamped in place. The tools that are not
being used live on some shelving brackets
on my garage wall.
This system has worked well for me.
Doug
On Mon, Feb 9, 2015 at 7:50 PM, Brad Kahler <bkahler1@gmail.com> wrote:
> I've got several bench grinders that I would like to mount on some sort of
> movable pedestals. I don't want to anchor them to the floor so whatever I
> end up using needs to be stable but portable.
>
> I've got several of the Harbor Freight 3 footed pedestals that would only
> work if anchored to the floor and worse they are two short to use.
>
> Any suggestions on something that can be purchased, fabricated or what not?
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|