shop-talk
[Top] [All Lists]

Re: [Shop-talk] Sleeving a hydraulic clutch cylinder

To: 'Shop Talk' <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Sleeving a hydraulic clutch cylinder
From: <tr3driver@ca.rr.com>
Date: Wed, 29 Aug 2012 19:44:15 -0400
Authentication-results: cdptpa-omtalb.mail.rr.com smtp.user=tr3driver@ca.rr.com; auth=pass (LOGIN) a=05ChyHeVI94A:10 a=IkcTkHD0fZMA:10 a=c9fncSKDR1UA:10 a=ayC55rCoAAAA:8 a=XEdG05NyAAAA:8 a=aMCID_oXAAAA:8 a=rmeARIUzm4qxw9hWFmoA:9 a=QEXdDO2ut3YA:10 a=vxc9mT2MaW0A:10 a=hFwcADQ33CgJV9lcXZw7+A==:117
Delivered-to: shop-talk-archive@autox.team.net
Delivered-to: shop-talk@autox.team.net
Sensitivity: Normal
---- Gerald Brazil <gerrybraz@cablespeed.com> wrote: 
> A nice project for an amateur machinist but while you are working on it
> order a new one because your chances of getting it right on the first try
> are slim. 

Only problem with that, no one makes a 'correct' new cylinder for my car.

But I will practice on some scrap cylinders first.

Randall
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>