Is the problem that the knife is too long, too wide, or what? Also,
how much material are we talking about removing? You could use a
file if it's not a lot. There is such a thing as a power file. Check this:
http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=ATS5095
I have never used one. Never even seen one in person. And I have no
idea how long of a file it could take. Of course, it costs more than
a new knife block.
-Steve Trovato
strovato@optonline.net
At 10:19 AM 11/24/2011, eric@megageek.com wrote:
>I'm not sure if a wood working question is appropriate here, so let me
>know if I'm stepping outside the allowed content.
>
>I'm sure someone here has an answer however.
>
>OK, I have a nice knife block with knife set. One of the knives was
>replaced with a better one. The problem is that the new knife doesn't fit
>in the slot on the block.
>
>Does anyone know how to cut/expand one of those slots in a block of wood.
>I need to go about 7" deep?
>
>Failing any other solution, I was thinking of cutting the block in half
>with a bandsaw, routing the slot, then gluing it together. This is not my
>first choice however.
>
>Thanks guys and have a happy thanksgiving!
>
>Eric P
>"Be as beneficent as the sun or the sea, but if your rights as a rational
>being are trenched on, die on the first inch of your territory." Ralph
>Waldo Emerson
>_______________________________________________
>
>Shop-talk@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.96
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/shop-talk/strovato@optonline.net
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|