Yes we did. But the problem with that is that you need 360 degree access
to the changer. I couldn't figure out how to best work it out.
Moose
"Be as beneficent as the sun or the sea, but if your rights as a rational
being are trenched on, die on the first inch of your territory." Ralph
Waldo Emerson
"David C." <cavanadd@frontier.com>
02/26/2011 02:12 PM
To
Steven Trovato <strovato@optonline.net>
cc
eric@megageek.com, shop-talk@Autox.Team.Net
Subject
Re: [Shop-talk] Tire changer mount, the conclusion
Did we talk about welding a piece of square stock to the bottom of the
tire changer and shoving it into a car's receiver hitch?
Steven Trovato wrote:
> The only problem I see with that is that I don't happen to have a
> conveniently located super-heavy table. One thing I do have, though, is
> cars. So, I was thinking about doing something where the two support
> arms could go to pads under two tires on a car. Haven't tried it,
> though. It's just a concept.
>
> -Steve Trovato
> strovato@optonline.net
>
> At 01:44 PM 2/25/2011, eric@megageek.com wrote:
>
>
>> So, I came up with way that the changer can 'fold' up to my table when
>> not
>> in use, but quickly pulls out and with one nut, tightens super sturdy!
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|