It was discussed at least some. Wouldn't you need to use two to eliminate the
twisting.
Moose's solution uses the triangle mounting to serve that purpose.
Rich White Central, IL USA
'63 TR3B TCF###L
That ain't a scrap pile, that is my car!
> Date: Sat, 26 Feb 2011 11:28:50 -0800
> From: cavanadd@frontier.com
> To: strovato@optonline.net
> CC: shop-talk@Autox.Team.Net
> Subject: Re: [Shop-talk] Tire changer mount, the conclusion
>
> Did we talk about welding a piece of square stock to the bottom of the
> tire changer and shoving it into a car's receiver hitch?
>
> Steven Trovato wrote:
> > The only problem I see with that is that I don't happen to have a
> > conveniently located super-heavy table. One thing I do have, though, is
> > cars. So, I was thinking about doing something where the two support
> > arms could go to pads under two tires on a car. Haven't tried it,
> > though. It's just a concept.
> >
> > -Steve Trovato
> > strovato@optonline.net
> >
> > At 01:44 PM 2/25/2011, eric@megageek.com wrote:
> >
> >
> >> So, I came up with way that the changer can 'fold' up to my table when
> >> not
> >> in use, but quickly pulls out and with one nut, tightens super sturdy!
> > _______________________________________________
> >
> > Shop-talk@autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation $12.96
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/rlwhitetr3b@hotmail.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|