shop-talk
[Top] [All Lists]

[Shop-talk] Plasma Cutter- the review

Subject: [Shop-talk] Plasma Cutter- the review
From: tr3driver at ca.rr.com (Randall)
Date: Fri, 14 Jan 2011 13:30:48 -0800
References: <788978.26692.qm@web82406.mail.mud.yahoo.com> <OFAC9B4B16.AAF35588-ON85257818.0074816F-85257818.007499FB@mail.megageek.com>
> The air requirements are very little.  In fact, they just say between
> 50psi and 70 psi.  There is no cfps requirement on it.

The maker's website gives 3.5 cfm:
http://ramsond.com/proddetail.php?prod=CUT50DY

It doesn't really specify whether that is 3.5 scfm (ie 3.5 cf after
expanding to 1 atmosphere) or acfm (actual 3.5 cf of compressed air), but
usually air tools are given as inlet acfm, meaning it needs roughly 17 scfm
(at 4 atmospheres/60 psi).

-- Randall 

<Prev in Thread] Current Thread [Next in Thread>