On 08/01/2011 23:26, Randall wrote:
> For example, two 6407K43 plus a 6407K53 might do, for about $60 plus
> shipping and tax.
> http://www.mcmaster.com/#shaft-couplings/=ai8f3y
>
How about scroll down the page to Clamp-on Couplings. Try 3084K51. You'd
need to bore out one end to 3/4 inch and cut a keyway then get a 1.75
inch OD bush and bore out to 1.778 inch, unless you can find a ready
made item. MMC carry a_lot_of bushes. It might be possible to bore out
both ends of a 3084K36. Depends how much spare there is.
Nick Brearley
Wishing MMC operated in the UK
|