shop-talk
[Top] [All Lists]

Re: [Shop-talk] Funny wrench request

To: <tr3driver@ca.rr.com>, <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Funny wrench request
From: Jim Stone <jandkstone99@msn.com>
Date: Fri, 21 May 2010 14:30:12 -0500
Now that I can see the area, did you try a crow's foot wrench?

> From: tr3driver@ca.rr.com
> To: shop-talk@autox.team.net
> Date: Fri, 21 May 2010 11:03:02 -0700
> Subject: Re: [Shop-talk] Funny wrench request
>
> Thanks to all for the suggestions.  Looks like the QuadBox is the best
> solution available, so I'm going to run over to my local Ace in a bit and
> see if they have one in stock.
>
> In case anyone is interested, here is a shot of the location in question,
> with the nut already removed.  The nut in the foreground is actually 1/16"
> smaller than what should be in there, so you can see that the flange is
> quite close to the nut.
> http://tinyurl.com/2bzwo3e
>
> And the angle of that shot makes the area seem rather roomier than it is,
> here's another one (other side, with the pan/flange removed) that better
> shows how close the frame member is:
> http://tinyurl.com/2au5dxc
>
> -- Randall
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/jandkstone99@msn.com
>

_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_3
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>