At 05:47 AM 10/18/2009, nick brearley wrote:
>Has anyone experience of ultrasonic carb cleaners?...
No experience with ultrasonic carb cleaners, but I have the same problem with
my Morgan. The carb gums up something bad.
What I do, is spray it down with spray carb cleaner, then I take a piece of
stranded wire, strip several inches of insulation off, and pull 1, 2, or 3 wire
and cut them off. Then I use them to try and poke through all the jets and
passages in the carb. For the larger holes, I twist 2 or 3 wires together
depending on the size of the hole. As I'm doing this, I'll squirt more carb
cleaner into the area I'm working on.
This has worked even on the hard to get to port for the accelerator pump.
It just takes time.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|