shop-talk
[Top] [All Lists]

Re: [Shop-talk] DC power supplay for home plating

To: "Dan and Jenny Fest \(Coles Nurseries Inc\)"
Subject: Re: [Shop-talk] DC power supplay for home plating
From: Doug Braun <doug@dougbraun.com>
Date: Sun, 18 May 2008 10:07:14 -0700 (PDT)
A few years ago I got a pretty nice
battery-replacement power supply from RS.  It has a
switch to select 3-4.5-6-7.6-9-12 volts, it is
electronically regulated (good for powering a CD
player, not so important for plating), can put out
800mA, and has a bunch of different style plugs you
could put on the end of the cord.

The part number is 273-1667.

They don't seem to carry this any more, but their
model  273-029 has the same output voltages, a higher
current capacity (1000 vs 800mA), and appears smaller.
 (Geek moment:  it is probably a switcher instead of a
transformer supply).  It sells for $18.99, which is a
good deal, considering that they are trying to get $30
for cell phone chargers which are simpler and cheaper
to make.

If you have a lot of electronic gadgets around the
house and shop, this sort of power supply can be very
handy.  It is almost as useful as an adjustable
laboratory or test-bench power supply, and costs much
much less.

Doug



--- "Dan and Jenny Fest (Coles Nurseries Inc)"
<coles@colesnurseries.com> wrote:

> Guys:
> At the very least, does a place like Radio Shack
> sell a DC power supply unit
> that converts ac to dc then puts out the same volts
> as 2 D's ??? If not too
> expensive, this would be a bit more reliable then
> the Batterys plus allow
> alittle experimenting with a little higher voltages.
> Any thoughts ??
> Dan
> _____
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>