I think that is the plate you're looking for. if you position the one screw
under the horizontal part of the bent rod, with the two screws and the rest
of the bracket above it, I think that is how it was originally set up. I
don't know that the rest of that bracket would still serve a purpose in your
truck.
There might have been a plastic or nylon bushing of some sort under it, but
I don't recall one from the last one of those I took apart (years ago).
--
Steve@OldSub.com
www.OldSub.com
On 2/17/08, Tom Cooper <tntcoop@earthlink.net> wrote:
>
> I was able to find a plate with 3 screws, but this plate doesn't seem to
> work for what I need it to work for.
>
> http://coopscorner.com/misc/DSCN1410.jpg
>
> -----Original Message-----
> *From:* oldsub@gmail.com [mailto:oldsub@gmail.com] *On Behalf Of *Steve
> Hanberg
> *Sent:* Sunday, February 17, 2008 9:24 PM
> *To:* Tom Cooper
> *Cc:* oletrucks@autox.team.net
> *Subject:* Re: [oletrucks] accel pedal
>
> That looks similar to late 70's Chevy stuff I remember. I think there is
> a little black plate and three or four self-tapping screws that hold the
> pivot to the toe board. Should be easy to find one in any you pull it
> place.
> --
> Steve@OldSub.com
> www.OldSub.com
>
> On 2/17/08, *Tom Cooper* <tntcoop@earthlink.net> wrote:
>
> I messed up and I think I misplaced a part that I need. I have the
> accelerator pedal, but I can't find the piece that mounts it to the
> floor board. It uses a cable, which I have a cable, but I think it is
> from another car. Anyway can someone tell me if there is another piece
> that mounts this to the floor?
> http://coopscorner.com/misc/accel-pedal.jpg
>
> Thanks
> Tom in SC
|
