On Thu, 18 Dec 2003, Steve Hanberg wrote:
> The S10 frame is easily shortened, so if you start with a long one, making
> it the right length is not a big deal. The 4x4 has a wider rear axle, and
> fits better than the 2wd rears do. The S10 guys have to move the
> transmission rearward to fit a V-8, so I'm betting putting the 292 in would
> require even more rearward movement of the transmission and transfer case
> and such.
The only reason to move the engine back is to use an engine mounted fan or
a puller electric. 4.3 mounts and a push fan and the v-8 sit in there real
pretty.
> Would a s10 4X4 frame work with a 49 GMC? Would a 292 engine fit? Bob K in
> PHX
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
--
Scott H. Zekanis
zman@kungfumonkey.com
http://www.rod-o-rama.com
http://www.thehellbenders.com
1957 Buick Riviera Hardtop (2 dr., 364" Nailhead)
1959 GMC in Chevy Sheetmetal 1/2 Ton (235" Inline 6)
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|