oletrucks
[Top] [All Lists]

Re: [oletrucks] bed wood finishing

To: "Oletrucks@Autox.Team.Net" <oletrucks@autox.team.net>
Subject: Re: [oletrucks] bed wood finishing
From: Kevin Murphy <kevin@jmadv.com>
Date: Mon, 13 Jan 2003 11:49:31 -0800
I've used CPES penetrating epoxy followed with a 2 part polyurethane varnish
on all my wood boats and have found it to be excellent. It has extended my
varnish cycle from every 6 months to almost three years. The polyurethane is
extremely tough and is also very easy to touch up if it does get dinged.
I plan to use it on my bed wood.
They have a bunch of helpful info about wood coatings on their website:
http://www.rotdoctor.com

Murph
'49 GMC 3/4 ton




> From: "Bruce Gyger" <bruce@destinationseattle.com>
> Organization: Destination Seattle
> Reply-To: "Bruce Gyger" <bruce@destinationseattle.com>
> Date: Mon, 13 Jan 2003 09:01:53 -0800
> To: "Blaine & Maggie Dumkee" <bmdumkee@auroranet.nt.ca>,
> "Oletrucks@Autox.Team.Net" <oletrucks@autox.team.net>
> Subject: Re: [oletrucks] bed wood finishing
> 
> I finished the oak in my '55-2nd with West System epoxy.  The 207 hardener is
> UV resistant.  I topped it off with 3 coats of a spar varnish.  Excellent UV
> and moisture resistance and bomb proof to boot.  I haul 'stuff' and this
> 3-year old finish is none the worse for wear.
> 
> Bruce Gyger
> www.destinationseattle.com
> A Convention, Meeting, and Event Support Company
> (206) 310-1795
> ----- Original Message -----
> From: Blaine & Maggie Dumkee
> To: Oletrucks@Autox.Team.Net
> Sent: Wednesday, January 08, 2003 1:35 PM
> Subject: [oletrucks] bed wood finishing
> 
> 
> I have ordered a complete bed with oak bed wood and stainless trim from
> Mar-K.
> 
> Any suggestions or experience with refinishing the wood? I have read the
> short blurb on Mar-K's web page.
> 
> The truck will be driven, but only in the summer, and hopefully in dry
> conditions. It will also be garaged. I have no intentions of hauling
> 'stuff'.
> 
> Two ideas, typical urethane, and linseed oil. I have heard over time
> urethane will peel, but I am scared linseed oil will darken.
> 
> Anybody have any experience to add to my dilemma?
> 
> Blaine Dumkee
> 1959 GMC 9314
> Fort Smith NT
> Canada
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>