Over the past six months I've completely replaced my entire brake system. I
did the rear cylinders several months ago, and the master cylinder and all
the lines when I put disk brakes on the front some weeks ago.
I did not have to power bleed mine. I just filled the master with fluid and
started bleeding just like normal. That part of the job was an easy
success. Instead of a power bleeder I use a teenager to pump the pedal.
But I'm still fighting with the pedel. It now seems to bind near the top of
the stroke and does not always return all the way to the top. I've adjusted
the free play so the brakes don't drag, but the brake lights stay on...
----- Original Message -----
From: "Jim Nordwall" <jimnordwall@yahoo.com>
To: "29871" <29871@msn.com>; <oletrucks@autox.team.net>
Sent: Sunday, December 22, 2002 8:54 PM
Subject: Re: [oletrucks] brakes
> Spend $40 and get a vacuum pump made to bleed brakes
> with. Pour fluid into the master cylinder, and using
> the vacuum pump, bleed the wheel cylinder furthest
> away. Keep filling the master cylinder, if it goes
> dry, you will get more air in the brake lines. After
> you get fluid with no air bubbles, move to the next
> furthest away wheel cylinder and repeat the process.
> Same procedure for the remaining two cylinders. I
> generally throw away the frist couple of ounces of
> brake fluid from each wheel and the recycle the rest.
> If you installed a latemodel dual
> mastercylinder(recommended even for a restoration),
> this method will most likely work. Some of the GM
> master cylinders only work well when the have been
> power bleed. I have never had to power bleed any, but
> have been told that others have.
>
> I'm sure you know this, adjust the brake shoes so that
> they just contact the drums, before you start.
>
> Jim Nordwall
> 1950 3100
>
>
>
> --- 29871 <29871@msn.com> wrote:
> > I have a '55 second series with a brand brake
> > system, complete from wheel
> > cylinders to pedal.
> > The system is completely dry of fluid and I want to
> > know the best way to fill
> > the system with new brake fluid.
> > Also I have new lines and new master cylinder. Like
> > I said, this is a
> > completely dry system.
> > Thanks for any info you can give me.
> > Kevin
> > oletrucks is devoted to Chevy and GM trucks built
> > between 1941 and 1959
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|