Take the bushing and spindles to a automotive machine shop, thay will
install & ream bushings!
Greg in Fla
56 short
-----Original Message-----
From: S Schmidt <sheldon@ssmachine.com>
To: oletrucks <oletrucks@autox.team.net>
Date: Thursday, May 31, 2001 9:12 AM
Subject: RE: [oletrucks] King Pin Bushing Reamer .923
>try www.mcmaster.com
>
>they have or can make almost any size reamer needed...
>
> Sheldon Schmidt
> SS Machine Works, Inc.
> '56 3100 NAPCO
>
>
>-----Original Message-----
>From: owner-oletrucks@autox.team.net
>[mailto:owner-oletrucks@autox.team.net]On Behalf Of Ross Piercey
>Sent: Wednesday, May 30, 2001 12:35 PM
>To: oletrucks
>Subject: [oletrucks] King Pin Bushing Reamer .923
>
>
>I'm at the point of replacing the king pins on my 51 and ran into a
>problem with the bushings. The shop manual calls for them to be reamed
>out to .923 with a J-3057 reamer after installation. I've called all the
>tool supply shop around town and searched the net for a reamer with no
>luck. The closest I can find is .9219 or 59/64". can someone give me a
>lead as to where I could buy one or maybe someone on the list has one
>for sale.
>J-3057 King Pin Bushing Reamer .923" or equivalent
>--
>Ross Piercey
>51 Chevy 3/4, 5W, LB
>Fort McMurray, Alberta
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|