----- Original Message -----
From: Ross Piercey
To: oletrucks
Sent: 5/30/01 12:35:04 PM
Subject: [oletrucks] King Pin Bushing
Reamer .923
I'm at the point of replacing the king pins on my 51 and ran into a
problem with the bushings. The shop manual calls for them to be
reamed
out to .923 with a J-3057 reamer after installation. I've called all
the
tool supply shop around town and searched the net for a reamer with
no
luck. The closest I can find is .9219 or 59/64". can someone give me
a
lead as to where I could buy one or maybe someone on the list has one
for sale.
J-3057 King Pin Bushing Reamer .923" or equivalent
--
Ross Piercey
51 Chevy 3/4, 5W, LB
Fort McMurray, Alberta
Call the tool places back, ask for an adjustable/indexable
reamer. Most likely it'll be a hand reamer, but should work fine.
--- Mike
--- passnb4u@earthlink.net
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|