try www.mcmaster.com
they have or can make almost any size reamer needed...
Sheldon Schmidt
SS Machine Works, Inc.
'56 3100 NAPCO
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Ross Piercey
Sent: Wednesday, May 30, 2001 12:35 PM
To: oletrucks
Subject: [oletrucks] King Pin Bushing Reamer .923
I'm at the point of replacing the king pins on my 51 and ran into a
problem with the bushings. The shop manual calls for them to be reamed
out to .923 with a J-3057 reamer after installation. I've called all the
tool supply shop around town and searched the net for a reamer with no
luck. The closest I can find is .9219 or 59/64". can someone give me a
lead as to where I could buy one or maybe someone on the list has one
for sale.
J-3057 King Pin Bushing Reamer .923" or equivalent
--
Ross Piercey
51 Chevy 3/4, 5W, LB
Fort McMurray, Alberta
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|