>From: "Michael Lubitz" <mlrba@texas.net>
>Reply-To: "Michael Lubitz" <mlrba@texas.net>
>To: "W&D" <haist2@home.com>, <MLayton324@aol.com>,
><oletrucks@autox.team.net>
>Subject: [oletrucks] Couple of parts questions, carburetor
>Date: Tue, 2 Jan 2001 19:31:08 -0600
>
Hi Mike,
I had to replace those studs for the same reason. I removed them after two
days of "super penetrant" and a little tapping. I carefully applied narrow
vise-grips to the non-threaded portion of the studs.
Good luck,
Don '54 3100
>Guys,
>
>Along the same train of thought . . .
>
>I bought a carburetor insulator plate but the studs from the intake
>manifold
>are too short to add the 1/2" thick insulator plate. Do I really need this
>plate? If so, I can't turn the studs for the life of me. Any tips on
>getting these studs out?
>
>Also, the exhaust manifold has a heat riser and heat control valve that are
>majorly stuck. Any ideas on this? Is it important to move? What do I do
>to free it?
>
>Again, thanks in advance.
>
>Michael Lubitz
>1946 Chevy 3/4 ton stock
>1948 Chevrolet 3100, soon to be deluxe
>Austin, Texas
>
>----- Original Message -----
>From: "W&D" <haist2@home.com>
>To: <MLayton324@aol.com>; <oletrucks@autox.team.net>
>Sent: Tuesday, January 02, 2001 6:47 PM
>Subject: Re: [oletrucks] couple of parts questions
>
>
> > ----- Original Message -----
> > From: <MLayton324@aol.com>
> > To: <oletrucks@autox.team.net>
> > Sent: Tuesday, January 02, 2001 12:24 PM
> > Subject: [oletrucks] couple of parts questions
> >
> >
> > > are carbs from 235's interchangeable with 216's ?
> >
> > No. The manifold and mount studs are different and they are not
> > interchangable.
> >
> > > rare mouldings that are on the back lower sections of front
> > > and rear fenders
> >
> > That's the deluxe trim that was offered on panel trucks. VERY hard to
>find.
> > No repro that I know of. Does look cool, though.
> >
> > <><
> > Whitney Haist
> > Orinda, CA
> > Chevy Trucks: 2-'46s & a '39
> > www.jps.net/haist/artdeco.htm
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
_________________________________________________________________
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|