Jeff,
I used the swing pedal assembly from an 80's Chevy Van. The firewall shape
was similar to my old truck so very little modification was needed there. I
cut the dash side of the assembly off and attached a brace from the assembly
to the dash. It also came with the proportioning valve for disc/drum. I
may have a picture of what it looks like installed if you would like to see
it. The only down side I can think of is that it has a large booster on the
firewall unlike the small ones on MII and the under-the-floor models.
Terry Stellman
1949 3600
Missouri City, Texas
> -----Original Message-----
> From: Jeff Davis [SMTP:jsd51@hotmail.com]
> Sent: Thursday, December 09, 1999 11:54 PM
> To: oletrucks@autox.team.net
> Subject: [oletrucks] Power Brakes
>
> I was wondering if anyone could give me some suggestions on
> installing
> power brakes on and '51 AD.
> If youI put the master cylinder/power booster assy. on the firewall,
> how did you reinforce the firewall. Any and all detailed suggestions would
>
> be greatly appreciated. Thanks in advance
>
> Jeff Davis
> '51 custom
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|