There has to be some machining done on the shaft. I believe it is just
taking off the collar. Also, you have to have a different clamp I believe. I
think $50 is a little steep. I paid $35 for mine and a friend did the
machine work. Buffalo Enterprises will do the machining and make the clamp.
I believe it is somewhere around $50 for that. Buffalo's phone number
is(360) 652-7684. You can use my name if you want.
Ralph Linnell
"ChevySix"
ChevySix@seatac.net
http://www.seatac.net/chevysix/
Inliners International Membership Chairman
Inliner # 2132
----- Original Message -----
From: <STMSymank@aol.com>
To: <oletrucks@autox.team.net>
Sent: Thursday, July 29, 1999 3:39 PM
Subject: [oletrucks] does a 250 hei dist.fit fine into a 261 ci?
> My vac advance went south. I can have it rebuilt for 25 bucks, but I can
buy
> a used 250 hei distributor with cap and wires for fifty, and it looks like
a
> fit, but looking through the threads there is some mention of spacing
> required. Anyone know the skinny on this job? My 261 is a 59
>
> Thanks a million
> Stan the man
> Newberg, Or
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|