Ditto. I used McMaster Carr for SS bed bolts (some were missing). You can get
Grade 8 bolts and cap screws there as well.
Ordering is easy and is fast.
Tom B. '57 Stepside 3200
-----Original Message-----
From: Dave Cunningham [SMTP:djcvjc@riconnect.com]
Sent: Saturday, July 17, 1999 4:40 PM
To: Mike stone; oletrucks@autox.team.net
Subject: Re: [oletrucks] Pacer Front End
Mike,
Try McMaster-Carr they have a large selection of bolts.
Dave Cunningham
55 GMC
http://www.mcmaster.com/
-----Original Message-----
From: Mike stone <mrston@hotmail.com>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Saturday, July 17, 1999 5:59 PM
Subject: [oletrucks] Pacer Front End
>Hi Everybody,
> I haven't written in a while. I've been learning from the group. I'm
>putting a Pacer front end in my 50 3100. I bought it from a friend who
>pulled it at the wrecker's. He had to disassemble the upper A-arms to get
it
>out. The threads on this subject all say to pull the mounting bolts with
>the front end because they are hard to find. Boy, is this ever true! He
>left them in the donor car and somebody else got them! I need 9/16s studs,
>21/2" long, threaded about 3/4s", course thread pattern on each end. I've
>tried Autozone, Kragens, Pacific Bolt, and every hardware store in two
>counties. No one has a clue. I have the nuts to fit. These should be grade
>8, or the last words I ever hear will be my wife saying "I told you so"!
>Does anyone have any suggestions on where I might order the studs to put
the
>top of the Pacer frontend back together? Thanks, Mike Stone
>
>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|