Mike,
Try McMaster-Carr they have a large selection of bolts.
Dave Cunningham
55 GMC
http://www.mcmaster.com/
-----Original Message-----
From: Mike stone <mrston@hotmail.com>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Saturday, July 17, 1999 5:59 PM
Subject: [oletrucks] Pacer Front End
>Hi Everybody,
> I haven't written in a while. I've been learning from the group. I'm
>putting a Pacer front end in my 50 3100. I bought it from a friend who
>pulled it at the wrecker's. He had to disassemble the upper A-arms to get
it
>out. The threads on this subject all say to pull the mounting bolts with
>the front end because they are hard to find. Boy, is this ever true! He
>left them in the donor car and somebody else got them! I need 9/16s studs,
>21/2" long, threaded about 3/4s", course thread pattern on each end. I've
>tried Autozone, Kragens, Pacific Bolt, and every hardware store in two
>counties. No one has a clue. I have the nuts to fit. These should be grade
>8, or the last words I ever hear will be my wife saying "I told you so"!
>Does anyone have any suggestions on where I might order the studs to put
the
>top of the Pacer frontend back together? Thanks, Mike Stone
>
>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|