oletrucks
[Top] [All Lists]

Re: [oletrucks] NO BRAKES

To: dillo021@tc.umn.edu, doodle@flintemc.net
Subject: Re: [oletrucks] NO BRAKES
From: Chris Dillon <dillo021@tc.umn.edu>
Date: Mon, 05 Apr 1999 16:19:20 -0500
Okay it was a test you guys passed, I looked at the book I thought I read it in
I am wrong, sorry...know wonder it took so lon to bleed those brakes on the 51!

Chris Dillon


Passnb4U@aol.com wrote:

> In a message dated 4/5/99 1:25:44 PM Pacific Daylight Time,
> dillo021@tc.umn.edu writes:
>
> <<
>  Did you bleed the master cyclinder?  Most likely it air in the lines, try
>  bleeding the shortest length of tue first (this is usually the drivers
>  front wheel) then move to the 2nd longest and so on.  Sometimes bleeding a
>  fresh system will take a while be patient, also make sure all you new
>  connections are tight.  Good Luck. >>
>
>   This is backwards, start at the point furthest from the master cylinder.
>
>   Mike

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>