Did you bleed the master cyclinder? Most likely it air in the lines, try
bleeding the shortest length of tue first (this is usually the drivers
front wheel) then move to the 2nd longest and so on. Sometimes bleeding a
fresh system will take a while be patient, also make sure all you new
connections are tight. Good Luck.
Jimmy wrote:
> I need a little help. I installed disc brakes on my 55 yesterday.I have
> bled all lines using a quart of brake fluid.It has power brakes. When
> you crank the engine and apply the brake pedal goes to the floor, you
> have to pull it back up and still no brakes. Could I still have air in
> the lines.
> Jimmy
> doodle@flintemc.net
> http://members.flintemc.net/~doodle/index.html
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|